Gava Plast 012

Plastic door infill panel

Suitable for plastic and aluminium door

  • Available in 5 shades of white (for various profile systems)
  • Supplied in the following wood imitations
  • The thickness of the door infill panel ranges from 24 mm to 60 mm
  • For thickness from 36 mm, Core F is recommended
  • Suitable for plastic as well as aluminium door


The plastic door infill panels by GAVAplastare manufactured by sealing of shaped PVC boards and materials with thermal insulation properties. We use a specially developed and tested PVC material from an internationally renowned producer of plastics, designed exclusively for the manufacturing of door infill panels. By combining these materials with adequate structure of the core, we managed to eliminate the formation of surface fissures even in the case of infill panels located in places exposed to direct sun. PVC slabs are laminated  exclusively with cold foils. The used coloured plastic slabs are  made of cold plastic which absorbs a significantly lower amount of thermal radiation. For wood imitations, the core Izofix is usually recommended. In case of thickness of 36mm and more, we recommend the Core F which can significantly reduce horizontal forces affected to the door infill panel. These forces are the result of the bimetallic effect caused by differences between temperatures in the exterior and interior. 

The GAVA plast infill panels are supplied and cut to meet customer requirements,  but with maximum parameters of  850mm x 2000 mm and tolerance of ±2 mm.

Each infill panel is covered with a protective foil. The foil only serves for transportation and we do not recommend to leave it on the panel after it has been installed in the  door. External factors may cause a permanent  adherence of the foil to the panel within several days. 




Door infills with Vitrage Decorglass

Abstrakt
Abstrakt
Arkáda
Arkáda
Kala
Kala
Klasik
Klasik
Raute
Raute
Twist
Twist
Toera
Toera
Horizon
Horizon
Kolibrik
Kolibrik

Door infills with Vitrage Decorglass

Tulip
Tulip
Fazeta
Fazeta
Waia blanc
Waia blanc

Door infills with sandblasted glass

Aces
Aces
Corola INV
Corola INV
012 INV
012 INV
R20 INV
R20 INV
001 INV
001 INV
Specta INV
Specta INV
Venera INV
Venera INV
Espi INV
Espi INV
O20 INV
O20 INV
Related products
  • GAVA Plast 010
  • GAVA Plast 011
  • GAVA Plast 011+011/2
  • GAVA Plast 015
  • GAVA Plast 020
  • GAVA Plast 020+020/2
  • GAVA Plast 021
  • GAVA Plast 021+021/2
  • GAVA Plast 025